Short answer
A tyre size like 225/45 R17 94W means 225 mm wide, a sidewall 45% as tall as the width, radial construction, a 17-inch rim, a load index of 94 (670 kg per tyre) and a W speed rating (270 km/h). Always match or exceed the load index and speed rating on your car's door placard, and check the four-digit DOT code for the week and year the tyre was made.
Last month a customer in Al Quoz sent me a WhatsApp photo of his tyre with one question: which of these numbers do I tell the shop? He had found a cheap set online that matched '225/45 R17', paid for it, and only when I arrived to fit them did we notice the new tyres were 91V while his Golf GTI's placard asked for 94W. Same size, wrong load and speed rating. We sent them back. That conversation happens more than you would think, so here is the sidewall decoded properly.
Everything below comes from reading thousands of sidewalls in basement car parks and on the hard shoulder over eight years. I will use one real example the whole way through, 225/45 R17 94W XL, because it is one of the most common sizes we fit on mid-size saloons and hot hatches in Dubai.
What does 225/45 R17 94W mean on a tyre?
The main size code is a short sentence. Read it left to right and every part tells you something about the tyre's shape or ability.
| Marking | What it means | Our example |
|---|---|---|
| 225 | Section width in millimetres, sidewall to sidewall | 225 mm wide |
| 45 | Aspect ratio: sidewall height as a percentage of width | 45% of 225 mm, about 101 mm tall |
| R | Radial construction (almost every car tyre today) | Radial |
| 17 | Rim diameter in inches | Fits a 17-inch wheel |
| 94 | Load index: maximum weight per tyre at full pressure | 670 kg per tyre |
| W | Speed rating: maximum sustained speed | 270 km/h |
| XL | Extra Load: reinforced for higher pressure and load | Can run higher pressure safely |
The width and aspect ratio together decide the overall diameter of the tyre. Change either one and your speedometer, ABS and stability control all see a slightly different rolling circumference. That is why we never 'nearly match' a size. If the placard says 45, a 50 profile is not a free upgrade in comfort, it is a different tyre.
What is a tyre load index and why does it matter in the UAE?
The load index is the number people ignore, and it is the one that hurts most when it is wrong. It is the maximum weight a single tyre can carry at its maximum rated pressure. Multiply by four and you get the car's theoretical limit on that set.
| Load index | Max load per tyre | Typical vehicles |
|---|---|---|
| 88 | 560 kg | Small hatchbacks, Yaris, Sunny |
| 91 | 615 kg | Corolla, Civic, Elantra |
| 94 | 670 kg | Camry, Golf GTI, Accord |
| 100 | 800 kg | Mid-size SUVs, RAV4, X-Trail |
| 108 | 1,000 kg | Large SUVs, Prado, Pajero |
| 112 to 116 | 1,120 to 1,250 kg | Patrol, Land Cruiser, Tahoe |
In this climate the load index matters more than in Europe. A tyre that is carrying close to its limit flexes more, and flex makes heat. Add road surfaces of 60 to 70°C in July and a family loaded for a weekend in Fujairah, and an under-rated tyre is working much harder than it was designed to. I have seen sidewalls separate on SUVs fitted with car-rated tyres from a bargain shop. If you want to understand why heat is the real enemy, our page on what damages tyres goes through it zone by zone.
You can fit a higher load index or speed rating than your car's placard. You should not fit a lower one. On SUVs and pickups especially, a lower load index is the quickest way to a heat-related failure on the E11 in August.
How do I read the speed rating letter?
The letter after the load index is the speed rating. It is tested at the tyre's rated load, so it also tells you something about how well the construction handles heat at speed.
| Letter | Max speed | Where you see it |
|---|---|---|
| S | 180 km/h | Some all-terrain and older SUV tyres |
| T | 190 km/h | Economy saloons, many highway-terrain SUV tyres |
| H | 210 km/h | Most family cars |
| V | 240 km/h | Sportier saloons, premium SUVs |
| W | 270 km/h | Performance cars, German saloons |
| Y | 300 km/h | High-performance and luxury cars |
Nobody should be doing 270 km/h on Sheikh Mohammed Bin Zayed Road, so why care? Because a higher speed rating usually means a stiffer construction that copes better with sustained heat at the 120 to 140 km/h we all do on long runs to Abu Dhabi. If you drive a car that came on V or W tyres, stay there. For a deeper look at how the rating links to grip and heat, see our tyre performance guide.
Not sure which size and rating your car needs? WhatsApp us a photo of the sidewall and your door placard, and we will quote the right tyres fitted at your door.
What do XL, RF, RFT and the star symbol mean?
Around the main code you will find smaller markings. These are the ones that catch people out when ordering online.
- XL or Extra Load: reinforced internal construction. It carries more weight at a higher pressure. Do not run XL tyres at standard pressure under load, check the placard or ask us.
- RFT, ROF, SSR, ZP, DSST: different brand names for run-flat tyres. They can carry the car for a limited distance with zero pressure. Mixing run-flat and non-run-flat on the same car is a bad idea. Read more on run-flat tyres.
- Star (★): approved by BMW for that model. MO is Mercedes, AO or RO1 is Audi, N0 to N4 is Porsche. You can run non-marked tyres, but the OE-marked ones are tuned for the car.
- M+S: mud and snow. On many SUV tyres in the UAE this is just a tread pattern classification, not a sign of a winter compound.
- TWI or a small triangle: marks where the tread wear indicator bars sit inside the grooves. When the tread is level with those bars, at 1.6 mm, the tyre is finished.
- Max pressure: the most the tyre can hold. It is not your running pressure. Your running pressure is on the door jamb.
I still meet drivers who pump tyres to the number on the sidewall, often 44 or 51 psi. That is the ceiling, not the target. Running there in summer makes the centre of the tread wear fast and cuts grip. Use the placard, then read our tyre pressure guide for hot-weather adjustments.
Where is the date on a tyre?
Look for the letters DOT followed by a long code. The last four digits, usually in an oval, are the week and year of manufacture. 2425 means week 24 of 2025. It may only appear on one side of the tyre, so if you cannot find it, look on the inside face. We have a full walkthrough in our post on reading the DOT date code, including what age we consider too old for UAE heat.
What about the UTQG numbers like 400 A A?
Many tyres sold in the UAE also carry American UTQG grades: a treadwear number, a traction grade and a temperature grade. The treadwear number compares tyres within one brand only, so a 500 from one maker is not directly comparable with a 500 from another. The temperature grade is more useful here. A is the best resistance to heat build-up, C the lowest. For UAE driving I would not choose a C-rated tyre.
The sidewall tells you what the tyre is. Your door placard tells you what your car needs. When the two agree on size, load and speed, you are buying the right tyre. Everything else is brand preference.
Where do I find the correct tyre size for my car?
- Open the driver's door and look on the door pillar for a sticker listing tyre sizes and pressures.
- If it is missing, check the fuel flap or the owner's manual.
- Compare with what is currently fitted. A previous owner may have fitted the wrong size, so trust the placard first.
- Note whether front and rear sizes differ. Many BMW, Mercedes and Porsche models run staggered sizes.
- Send us both photos if anything does not match and we will confirm before ordering.
Once you know your size, you can compare options on our new tyres service page or see typical figures on the car tyre cost in Dubai page. If you are torn between brands, the Michelin and Hankook pages show how a premium and a mid-range maker compare on the same sizes.
Common sidewall mistakes I see in Dubai
- Ordering the right size but a lower load index because it was AED 60 cheaper per tyre.
- Mixing a run-flat on one axle with a regular tyre on the other after a puncture.
- Buying 'new' tyres that are already three years old by DOT code.
- Ignoring the asymmetric 'outside' marking and fitting the tyre inside-out.
- Fitting directional tyres with the arrow pointing backwards on one side.
Every one of these is avoidable if you spend two minutes reading the sidewall before paying. When our technicians fit tyres through mobile tyre fitting, we check size, load, speed, date and direction before the old tyre comes off.
Need the right tyres fitted today in Dubai, Sharjah or Abu Dhabi? WhatsApp us your size and we will confirm stock, DOT date and a starting price before we drive out.